Braces

Braces are used to solidify the frame and prevent the organiser from moving around in the drawer.

Since frame width and depth can only be varied by 1-cm increments, there can be a gap between the organiser’s frame and the drawer’s box. Furthermore, if the drawer’s box is irregular, this gap will not be constant along a side. If your organiser moves around in the drawer or if a frame panel bends outwards, add braces outside the organiser’s frame to fill the gaps.

Braces with depths of 2, 4, 6, and 8 mm are provided. Filenames are Brace_Hh_Dd.stl, where h is the height and d the depth.

(a) Braces (d in mm)

(b) Brace assembly

Braces and brace assembly