Braces
======

Braces are used to solidify the frame and prevent the organiser from moving
around in the drawer.

Since frame width and depth can only be varied by 1-cm increments, there can be
a gap between the organiser’s frame and the drawer’s box. Furthermore, if the
drawer’s box is irregular, this gap will not be constant along a side. If your
organiser moves around in the drawer or if a frame panel bends outwards, add
braces outside the organiser’s frame to fill the gaps.

Braces with depths of 2, 4, 6, and 8 mm are provided. Filenames are
``Brace_Hh_Dd.stl``, where ``h`` is the height and ``d`` the depth.

.. subfigure:: A|B
    :subcaptions: below
    :gap: 1cm

    .. image:: schemes/brace-parts.svg
        :alt: (a) Braces (d in mm)

    .. image:: schemes/brace-assembly.svg
        :alt: (b) Brace assembly

    Braces and brace assembly