Waves
=====

Waves are a low-profile alternative to dividers.

Wave parts vs fused waves
-------------------------

Waves can be assembled from crests, throughs, and left and right caps (a).
Alternatively, fused waves can be generated as a single part (b). In both cases,
waves slide into grooves like dividers. Waves require grooves targetting the
height of their caps, 3 or 4 cm.

.. subfigure:: AB
    :subcaptions: below
    :gap: 1cm

    .. image:: schemes/wave-assembly.svg
        :alt: (a) Wave assembly

    .. image:: schemes/wave-fused.svg
        :alt: (b) Fused wave

    Assembled and fused waves

Fused waves
-----------

Waves with several crests and throughs (a) can be used to hold ustensils and
other tools. Waves with a single long through (b) can be used to make small bins
or to reinforce a compartment if its panels tend to bend inwards. Since a
through is only 1 cm tall, it does not get in the way of most objects like a
divider would. The ``FusedWaves`` directory contains predefined holders and
bins that fit typical ustensils and kitchen tools. Filenames end in ``_Ww.stl``,
where ``w`` is the total part width.

.. subfigure:: AB
    :subcaptions: below
    :gap: 1cm

    .. image:: schemes/wave-holders.svg
        :alt: (a) Holders

    .. image:: schemes/wave-bins.svg
        :alt: (b) Bins

    Wave examples

Custom fused waves can be generated using the :doc:`command line interface
<cli>`.

Wave parts
----------

If you prefer to assemble waves from individual parts, the ``Wave/Cap``,
``Wave/Crest``, and ``Wave/Through`` subdirectories contain the necessary parts.
Cap filenames are ``WaveCapX_Hh_Pp.stl``, where ``X`` is ``L`` or ``R``, ``h``
is the height, and ``p`` is the padding, that is the width excluding the curved
portion; ``p`` can be 0. Crest filenames are ``WaveCrest_Hh_Pp.stl``, with
similar variables. Through filenames are ``WaveThrough_Ww.stl``, where ``w`` is
the width.

.. subfigure:: AB
    :subcaptions: below
    :gap: 1cm

    .. image:: schemes/wave-crests-caps.svg
        :alt: (a) Various crests and caps

    .. image:: schemes/wave-throughs.svg
        :alt: (b) The various throughs (w in cm)

    Wave parts